Application & Removal Tips
Unsure how to apply/remove a product?
See below for our recommendations on how to use our products.
TapeMM Up Boob Tape
APPLICATION​
-
Always apply to clean, dry skin. Do a patch test first to ensure no sensitivities or allergies occur.
-
We recommend using one time use nipple covers prior to application to protect sensitive areas.
-
Lift your breast into the desired position, then apply TapeMM Up Boob Tape to hold your breast in place. Refer to diagram below for best placement based on your outfits neckline.
REMOVAL
-
Peel back the tape slowly & gently with one hand firmly holding the skin behind the tape.
-
Do not attempt to rip the tape off like a band-aid. This can damage your skin and cause irritation.
-
For easier removal, soak the tape for 5 minutes with a skin-friendly oil (coconut oil, jojoba oil, citrus oil) prior to peeling off.
BoostMM Boob Inserts
APPLICATION​
-
Ensure skin is clean and dry prior to use.
-
Peel plastic film off outer inserts then stick the BoostMM Boob Inserts onto your outfit. Remove plastic film from inner inserts. With one hand, lift your breast into place, then stick the BoostMM Boob Insert to your breast from underneath and press upwards. Fasten your outfit and Ta Da! your Boob Boost is complete.
-
Do not throw away the plastic films which cover the inserts. You will need these if you intend to reuse your BoostMMs.
REMOVAL
-
Unfasten your outfit then gently peel the BoostMM Boob Inserts away from your skin. Remove BoostMM inserts from your outfit then cover both sides with plastic film before placing back into the packaging for storage and reuse.
Reusable Nipple Covers
APPLICATION​
-
Ensure skin is clean and dry prior to use.
-
Peel plastic film off outer nipple covers then stick onto breast, ensuring nipple is centred and not touching the adhesive.
-
Do not throw away the plastic films which cover the inserts. You will need these if you intend to reuse your Nipple Covers.
REMOVAL
-
Gently peel the Nipple Covers away from your skin. Cover inner adhesive with plastic film before placing back into the packaging for storage and reuse.
